Site Loader
Rock Street, San Francisco

This essay discusses the gesture of a cylinder on an inclined plane in an effort to reply the inquiry, “ How does the radius of a cylinder, or the sum of liquid nowadays within the cylinder, affect the velocity of the cylinder turn overing down an inclined plane? ” This probe involves utilizing cylinders with assorted radii, and altering the volume of liquid nowadays within the cylinder, and turn overing them over a incline of changeless length, placed at a changeless angle and changeless tallness, and so mensurating the clip the cylinder takes to cover a specific country, by which you can mensurate the velocity.

Cylinders of the same length and different radii were taken at first in which all were filled by H2O till their lip. Then they were rolled from the top of an inclined plane. At the underside there was a track of 50cm. The clip taken to cover the length of the track was recorded and so from there the velocity. This probe showed the radius is straight relative to the velocity of the cylinder.

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!


order now

For the other portion of the experiment it showed that the cylinder with most liquid nowadays within it would hold a greater velocity compared to the 1 with lesser liquid. Therefore the sum of liquid nowadays is besides straight relative to the velocity of the cylinder. Though there was a curious reaction to the velocity when the liquid was less than half. This can be explained by the viscousness and flow of H2O.

This survey is simply an effort at understanding better the factors that affect, and to what extent they affect, the gesture of a cylinder turn overing down an inclined and so no generalisation has yet been made. Though farther continued elaborate survey would assist in making so.

Word Count – 295 Wordss

=

Introduction and Rationale

For my group four undertaking we were carry oning an experiment which was related to a auto driving down a incline. We would alter the force per unit area of the tyres and so detect the difference on its breakage and acceleration. All in all we would prove how the alteration in force per unit area would ensue in the alteration in the gesture of the auto down the incline.

This was around the same clip when I had to get down up on my drawn-out essay so I thought why non establish it on the same principal. But I did n’t desire to make that as it would go insistent. So I thought why non carry on it on a cylinder turn overing down an inclined plane alternatively. It would about be similar to the auto scenario but yet non the exact version of it, more like a theoretical account.

‘Investigating the gesture of a liquid filled cylinder, down and inclined plane ‘ is one that seems simple but can go really complex. I thought that admiting factors that might hold an consequence of the turn overing gesture, and so pull stringsing those factors to see the alteration, and the extent of alteration in the gesture of the cylinder would be really interesting.

This essay is an effort to analyze the phenomena of peal of a cylinder and to analyze how factors, such as radius and volume of liquid nowadays, could be manipulated in accomplishing certain required velocity and its effects. The first aim is to analyze the difference in velocity when cylinders of different radius filled with H2O are rolled down the incline. For the 2nd portion of the experiment we will see the alteration in the gesture of the cylinder when we alter the sum of liquid nowadays within the cylinder. So this clip the radius is changeless and the volume of liquid nowadays within the cylinder keeps changing and with that we can analyze to what extent that effects the velocity of the cylinder.

An rating of the dependability of the measurings and claims assesses the cogency of the decisions made on this topic.

Background Information

I researched other experiments carried upon the same footing and I found rather a batch of consequences but all were on the same research inquiry. All were related to happening the acceleration of the cylinder turn overing down. I thought why non look into on factors that might hold an consequence on the velocity of the cylinder. There were non many experiments that I found in which the peal of the cylinder was examined proportion to the sum of liquid nowadays within it so it would be a complete new start to this probe. To transport out my experiment I could rely and associate to my Physicss class book ( Physics for the IB Diploma by K.A. Toskos ) as it was in relation to the chapters of mechanics and dealt with kinematic constructs and Force and Dynamics.

On one forum I did happen a treatment upon an experiment similar to this that person else had carried out. It dealt with the peal of tins filled with liquids of different viscousness and so step which can turn over farther.

Experiment Set-up Description

An experiment was designed to analyze the gesture of a cylinder turn overing on an inclined plane. Diagram 1 represents the experiment set-up.

Diagram 1

The cylinder used was a H2O pipe which was covered at both its terminals dual beds of balloons to forestall the escape of H2O. The inclined plane was a smooth wooden board, with a length of 79 centimeter, which was erected at an angle to organize a right angle trigon with the board as the hypotenuse.

Measurements

The measurings were taken as follows:

Cylinder ( internal radius, it I of import to maintain in head that throughout this experiment the radius being used is the internal radius of the cylinder, and tallness ) : Vernier Caliper.

Lengths of base and incline: measurement tape.

Volume of cylinder: by utilizing the expression 2hand inputting the values of R and H.

Mass of cylinder: deliberation machine.

Liquid when seting into the cylinder: by utilizing a breast pipette to acquire an accurate measuring of the liquid being put in.

It is of import to separate between the different cylinders. Therefore since there are 4 cylinders involved they shall be named A, B, C and D.

Cylinder A

Cylinder B

Cylinder C

Cylinder D

Radius ( centimeter ) A± 0.01cm

1.00

1.25

1.5

1.75

Volume ( cm3 ) A± 0.01cm3

62.83

98.17

141.37

192.42

Height ( centimeter ) A± 0.01cm

20.00

20.00

20.00

20.00

For the 2nd experiment another of import variable comes into drama which is the volume of liquid which is present within the cylinder and can besides be taken as the mass of the cylinder. For this experiment we use Cylinder B throughout. Let us take each different volume as a new missive. There are 4 different volumes used and so we shall call them V, W, X, Y and Z. the four lengths were selected by taking different percentiles of the entire volume of Cylinder B such as 0 % , 25 % , 50 % , 75 % and 100 % . Since it was at room temperature i.e. 25o C therefore the denseness of H2O was 0.99777g/cm3.

Volume V

Volume W

Volume Ten

Volume Yttrium

Volume Z

Volume of liquid

( cm3 ) A± 0.1cm3

0.0

24.5

49.0

73.5

98.17

Mass ( g ) A± 0.01g

66.95

91.39

115.84

140.28

164.66

Experiment Procedures

There are two stairss in this experiment. The first is to see the behaviour of cylinders with different radii all wholly filled to the lip with H2O. The 2nd is a turn overing down a cylinder filled with different volumes. For our convenience allow us call the experiments, the first Experiment 1 and the 2nd Experiment 2.

We can mensurate the difference these alterations make in the cylinder by mensurating the velocity. We have a changeless distance, and we can mensurate the clip taken by the cylinder to cover that distance and from there cipher the velocity. Therefore when we change the radius or the sum of liquid nowadays than we will be able to detect the alteration in velocity and come to a decision on the behaviour of the cylinder turn overing down the incline.

Using the length of the wooden board, a base and the floor we create an isosceles right angle trigon. The tallness of the base was 56 centimeter and the length of floor being utilized was besides 56 centimeter. this made the wooden board the hypotenuse with a length of 79cm. At the pes of the incline there are two sheets of graph paper attached each 25 centimeter long. This creates a track for the cylinder. When the cylinder rolls down the velocity keeps increasing due to the gravitative pull, though when it reaches the land the velocity becomes changeless and therefore we can mensurate that velocity. So we record the clip it takes the cylinder to cover that 50 centimeter. this we can make by a stop watch. Though when mensurating the clip it takes the cylinder to traverse the distance we have to maintain in head the automatic clip it takes us to snap the halt ticker button.

Experiment 1

For the first we have to make full all the cylinders with H2O and so at the gaps of the cylinder we cover it with a dual bed of balloons to forestall H2O from leaking. We must do certain that the balloons are to the full stretched otherwise H2O will be trapped in the furrows of the balloons. We do this with all the 4 cylinders and so turn over each a sufficient figure of times to take random mistakes.

Experiment 2

For the 2nd portion of the experiment we use merely Cylinder C throughout the whole experiment. In this we fill up H2O in 4 different volumes. To mensurate the sum of volume being poured into the cylinder we use a breast pipette. Then we roll all 5 different volumes a sufficient figure of times to take random mistakes.

Recorded Datas

The thought in this first portion of the experiment is to change the radius of the cylinder and so to detect the alteration in the velocity of the cylinder. While in the 2nd we vary the sum of H2O nowadays within the cylinder.

Then we collect informations for all of the cylinders and stand for them individually and so at the same time on one graph to detect the difference in one frame.A child job occurs every bit since there are no velocity sensors available in the research lab so a halt ticker needed to be used. This would affect some inaccuracy and so it had to be taken attention of. For this I measured my reaction clip to get down and halt the clock ticker and maintain that into history. I took 7 readings of my reaction clip, which I felt was a comprehensive figure, to guarantee that there would be no random mistakes and a changeless mean reaction clip would be figured out. Once I got my reaction clip I subtracted it from the clip taken for the cylinders to traverse the distance.

Test #

Chemical reaction clip ( MS )

1

12

2

12

3

13

4

12

5

13

6

11

7

12

Average reaction clip ( MS )

12.14

Now we record the timings of Experiment 1. The information recorded is as follows:

Cylinder A

Cylinder B

Cylinder C

Cylinder D

Observation #

Time ( MS )

Time ( MS )

Time ( MS )

Time ( MS )

1

35

31

28

25

2

35

32

29

26

3

35

31

28

26

4

34

31

28

26

5

35

32

29

27

6

36

31

28

27

7

34

31

29

26

Then we record the timings of Experiment 2. The information recorded is as follows:

Volume V

Volume W

Volume Ten

Volume Yttrium

Volume Z

Observation #

Time ( MS )

Time ( MS )

Time ( MS )

Time ( MS )

Time ( MS )

1

35

36

35

33

31

2

35

37

35

34

32

3

35

37

34

33

31

4

35

36

35

33

31

5

35

36

34

34

32

6

36

37

34

33

31

7

35

38

35

33

31

Datas Analysis

First we shall be analysing Experiment 1 and so travel on to Experiment 2.

Using the information we can happen the mean clip it takes the cylinders to turn over. Then we subtract the reaction clip it takes to enter a clip to happen out the exact clip it took the cylinder to turn over. Once we have that we can use the expression to happen out the velocity of the cylinder.

Then we can plot down graphs to demo the dealingss of the velocity with the radius and the sum of liquid nowadays.

Experiment 1

This tabular array shows the mean clip of each cylinder.

Cylinder A

Cylinder B

Cylinder C

Cylinder D

Average clip ( MS )

34.86

31.29

28.42

26.14

Average clip subtracted by reaction clip ( MS )

22.72

19.15

16.29

14.00

This tabular array shows the velocity of each cylinder.

Cylinder A

Cylinder B

Cylinder C

Cylinder D

Radius ( centimeter ) A±0.01cm

1.00

1.25

1.5

1.75

Distance covered ( centimeter ) A±0.5cm

50.0

50.0

50.0

50.0

Average clip ( MS )

22.72

19.15

16.29

14.00

Speed ( cm/ms )

2.20

2.61

3.07

3.57

From this we can do a graph to demo the relation between the radius and the velocity of the cylinder. We will set the radius on the x-axis and the velocity on the y-axis.

We can now see that the radius is relative to the cylinders speed.

Experiment 2

This tabular array shows the mean clip of each cylinder.

Volume V

Volume W

Volume Ten

Volume Yttrium

Volume Z

Average clip ( MS )

35.14

36.71

34.57

33.29

31.29

Average clip subtracted by reaction clip ( MS )

23.00

24.57

22.43

21.15

19.15

This tabular array shows the velocity of each cylinder.

Volume V

Volume W

Volume Ten

Volume Yttrium

Volume Z

Volume of liquid ( cm3 ) A± 0.1cm3

0

24.5

49

73.5

98.17

Distance covered ( centimeter ) A± 0.5cm

50

50

50

50

50

Average clip ( MS )

23.00

24.57

22.43

21.15

19.15

Speed ( cm/m ) A± 0.1cm3

2.17

2.03

2.23

2.36

2.61

From this we can do a graph to demo the relation between the volume of liquid filled and the velocity of the cylinder. We will set the volume on the x-axis and the velocity on the y-axis.

We can now see that the liquid filled is relative to the cylinders speed though there is a dip when the volume filled is merely 25 % .

Evaluation and Decision

Experiment 1

From the graphs and tabular arraies it is really clear that as the radius of the cylinders increases the velocity at which it travels besides increases. it can be looked at from another angle besides. Since the radius is bigger, so that means that the perimeter of the cylinder is besides bigger. And when a cylinder is theoretically opened up so it forms a four-sided with the tallness of the cylinder as the length and the perimeter as the breadth, so if the perimeter is bigger than the breadth is bigger. And if the breadth is bigger so it will busy more country so a four-sided with a smaller breadth. Thus the cylinder with the larger radius will turn over faster.

Experiment 2

For the 2nd one the consequences are slightly similar. The velocity once more is straight relative to the sum of liquid nowadays within the cylinder. As the liquid nowadays within the cylinder is increased automatically the velocity besides increases. The more liquid nowadays within the cylinder means that the cylinder is heavier. When the cylinder is heavier with will turn over quicker as it will garner more impulse along the manner and its weight shall be greater.

Volume W though does non look to follow the tendency. The velocity of W is lesser than is predecessor V. W is filled till 25 % of the maximal volume while V is wholly empty. The following three volumes X, Y and Z though follow the tendency. One account for the lower velocity of W can be that while it was turn overing instability was observed which did n’t happen with any other Volume. As W would make the terminal of its downward slope so the cylinder would go unsmooth in its axial rotation and even sheer a small. Since in W there was really less liquid and more of an empty country it is possible that during its axial rotation the liquid does n’t stay in one topographic point but spreads throughout the cylinder and this creates unevenness in the spread of the cylinders mass which so causes instability.

One ground for it could be viscousness. Viscosity is the measure that describes a fluid ‘s opposition to flux. Fluids resist the comparative gesture of immersed objects through them every bit good as to the gesture of beds with differing speeds within them. This can be related to Newton ‘s 2nd jurisprudence such that it states that the ensuing shear of a fluid is straight relative to the force applied and reciprocally relative to its viscousness. Over here we can even include Kinematic viscousness which is a step of the resistive flow of a fluid under the influence of gravitation. The viscousness of H2O at 20A a„? is 1.0020 millipascal seconds. Thus the viscousness could hold affected the axial rotation of the cylinder down the plane and could hold caused it to decelerate down when it would make the terminal portion of the incline.

We can even see this through the usage of a diagram.

Cylinder

Volume Ten

Volume W

Slope

This diagram shows both the supposable place of H2O when the cylinder is filled with 25 % of H2O and with 50 % of H2O.

Volume W

This shows that when the cylinder is turn overing down so the liquid is dawdling. The place of it is such that it somewhat pulls the cylinder back alternatively of forcing it further and increasing the velocity.

Volume Ten

In this the H2O covers half of the cylinder and even though it covers the back half of the cylinder like in Volume W it besides covers most of the forepart of the cylinder and therefore pushed the cylinder frontward. It cancels out the lagging consequence the H2O creates when there is 25 % nowadays.

Decision

Therefore we can reason that the radius of a cylinder and the sum of liquid nowadays within it do consequence the gesture of it. The extent of the consequence is besides shown through the graphs. So if one is to hold a cylinder with a high velocity the ideally the radius should be big and the cylinder should be filled wholly with liquid.

Problems faced

Along the class of the probe there were some jobs faced. The first was the truth of the clip. Even though my reaction clip was taken into history it still was n’t accurate plenty and the reaction clip itself was an norm.

Another job was that the cylinders were covered by balloons at the terminal and even though the balloons were stretched they sometimes did interfere in the gesture of the cylinders. This caused some random mistakes and sometimes the balloons would turn over off in the center of the track.

Last it was really difficult to place what the job with Volume W was. Somehow in every observation of it, it ever swerved or became unstable in the latter phases of its axial rotation down the plane.

Further research

Since it was non possible to see within the cylinder while it was turn overing it would non be possible to find precisely the place of the liquid, even though the presumable of the liquid is shown in the diagrams, so the ground stated above in the rating is merely a hypothesis and more probe on this would be another rather challenging experiment.

Then more probes can be carried out to happen the other factors that affect the gesture of a liquid filled cylinder down an inclined plane. A suggestion could be to change the liquid with its denseness. That is to hold cylinders filled by liquids with different densenesss such as cookery oils, gasoline, car oils, intoxicants and etc. We besides can turn over cylinders with different radii with the same sum of liquid nowadays within each. Therefore this shows that there are legion factors to be investigated within this subject and the informations collected and analyzed in this study can organize a suited foundation for future research.

Post Author: admin

x

Hi!
I'm Percy!

Would you like to get a custom essay? How about receiving a customized one?

Check it out